Groutix Logo

SILICONE REPLACEMENT Β· MELBOURNE

Silicone Replacement Melbourne

Groutix removes old, mouldy or peeling silicone and reseals the joint with fresh mould resistant silicone. We take the old bead out completely, so the new one bonds and holds.

Groutix 10 Year Waterproof Warranty Guaranteed
10 Year Waterproof WarrantyOn eligible completed work
8,000+Showers & Balconies RestoredAcross Melbourne & regional Victoria
Silicone recaulking in Melbourne, old failed silicone being removed from a shower base before resealing

Free Quote

Get Your Free Silicone Replacement Quote

Tell us where the silicone is peeling or mouldy and add photos of the joints. Photos are required, so we can see the bead and the surfaces before we quote.

  • Free quote, no obligation
  • Old silicone fully removed, never laid over
  • Mould resistant silicone finish
(03) 7023 8094

Request a Quote

Step 1 of 3 Β· The jobAbout 1 minute
Which area?
What do you need done?
Is it currently leaking?
Any damaged tiles? (optional)

Real Results

Silicone Replacement Before and After: Real Melbourne Jobs

Every photo below is a real Groutix job. Drag the slider to compare the joint before we started and after the new bead went in. No stock photos, no filters.

Shower base in Melbourne with split, peeling silicone around the edges before silicone recaulking
The same shower base in Melbourne after silicone recaulking, a clean new bead and regrouted wall tiles
BeforeAfter

Split Silicone Around a Shower Base, Stripped and Resealed

The bead around this shower base had split along the edges and gone black at the corners, the classic path for water to escape behind the tiles. We cut the old silicone out completely, cleaned the joint and resealed it with fresh mould resistant silicone.

Shower corner in Melbourne with blackened, split silicone along the wall and floor junctions before silicone recaulking
The same shower corner in Melbourne after silicone recaulking, fresh white seals along the corner and floor junctions
BeforeAfter

Blackened Corner Joints, Stripped Out and Resealed

The silicone in this shower corner had gone black along the wall and floor junctions and split away from the tiles, so every shower pushed water straight into the corner. We cut the failed sealant out completely, cleaned the joints and resealed the corner and the floor junctions with fresh mould resistant silicone.

Silicone is the flexible seal at every joint that moves, corners, base edges and around the bath. Once it splits or lifts, every shower pushes water behind the tiles, and a new bead smeared over the old one never bonds. If the water has already been getting out, see our leaking shower repair page.

Signs to Check

Signs Your Silicone Needs Replacing

Silicone wears out before almost anything else in a bathroom. Look for these signs.

Black or Pink Mould

Mould in the silicone bead that cleaning never shifts.

Why silicone fails β†’

Peeling or Lifting Edges

The seal pulls away from the surface and lets water in behind it.

How we reseal β†’

Cracked or Split Silicone

Cracks and splits through the bead, often along the base and corners.

Leaking shower repair β†’

Yellow or Hardened Silicone

Silicone that has gone yellow or hard has lost its flex and its seal.

What it costs β†’

Gaps at the Tile

Gaps between the bead and the tile where the bond has failed.

Silicone or grout? β†’

Shrinking at Corners

A bead that has shrunk or pulled away at the corners.

Shower regrouting β†’

Mould only on the surface may clean off. Mould through the bead, or a bead that has lifted, means it needs replacing.

Around Your Home

Where We Replace Silicone

Anywhere two surfaces meet and need a flexible, waterproof seal.

Shower Corners and Edges

Flexible seals where shower walls and floors meet.

Around the Bath

A fresh bead along the bath edge.

Shower Screen Frames and Base Edges

Seals around screen frames and base edges.

Vanities, Basins and Benchtops

Neat joints between fixtures and tiled surfaces.

Kitchen Sinks and Splashbacks

Flexible seals around kitchen wet areas.

Laundry Tubs and Wet Area Walls

Resealing around tubs and wet area junctions.

The Right Material

Silicone or Grout? Which Joint Gets Which

Both seal your bathroom, but they do different jobs.

The right material for each type of tile and fixture joint.
JointWhyWhat it needs
Flat tile to tile jointsThe joint does not move muchGrout. See shower regrouting or tile regrouting.
Inside corners and wall to wallWalls move and shrinkSilicone.
Wall to floor, base to wallDifferent materials move at different ratesSilicone.
Tile to bath, basin, benchtop or screenTwo surfaces that expand differentlySilicone.

Grout in a corner cracks. Silicone on a flat joint peels. We use the right one in the right place.

The Cause

Why Silicone Fails

Moisture and Soap Scum

Constant moisture and soap scum wear at the seal.

Movement

Corners and joints move over time.

Age

Silicone does not last forever.

New Over Old

New silicone laid over old silicone does not bond.

Our Process

Our Silicone Replacement Process

Clean, neat and made to last. Here is how it works.

  1. 01

    Inspect and Mark

    We check the joint, the tile edges and the surface, and note any grout or tile problem.

  2. 02

    Remove and Clean

    All old silicone and residue is removed. The joint is cleaned and left dry.

  3. 03

    Reseal

    Fresh mould resistant silicone is applied and neatly tooled.

  4. 04

    Cure and Recheck

    The bead cures before it meets water. We tell you the exact wait before we start.

We confirm the applicable workmanship warranty and repair scope in your quote.

Book Your Free Quote β†’
Shower corner in Melbourne with the failed black silicone cut out during silicone recaulking, removed strips lying on the floor

After the Job

How Soon Can I Use My Shower?

Do Not Touch the Bead

Leave it alone while it cures.

Keep the Area Dry

Keep the shower dry until we tell you it is ready.

Pricing

What Does Silicone Replacement Cost?

The price depends on how much silicone needs replacing, so we quote after we see it.

Length of Silicone

How much of the existing bead needs replacing.

Location

A shower corner versus a full bath surround.

Condition

The condition of the old silicone and residue.

Access

Screens and fixtures can affect access.

A Clear Quote First

We quote by the job so you know the price before work starts. Often combined with a regrout. For shower prices see shower regrouting.

Get a Free Quote β†’

Why Groutix

Why Choose Groutix

Honest Advice

We tell you if it is grout, not silicone.

Clear Quote First

You know the price before work starts.

Full Removal, Not Overlay

The old bead is removed completely before resealing.

Clear Warranty Scope

The applicable workmanship warranty is confirmed in your quote.

Customer Feedback

What Our Customers Say

Google Rating5.0β˜…β˜…β˜…β˜…β˜…Based on 296+ Google reviewsRead Verified Reviews
JJody LansdownePosted on GoogleGoogle
β˜…β˜…β˜…β˜…β˜…

β€œOutstanding work! Very happy with the job and service. I would recommend these guys. Very tidy.”

VVeronicaPosted on GoogleGoogle
β˜…β˜…β˜…β˜…β˜…

β€œI have had 2 showers re-grouted (floor and walls) and am really happy with the end result. The entire bathrooms look so good.”

LLars MadsenPosted on GoogleGoogle
β˜…β˜…β˜…β˜…β˜…

β€œCarlos did a really good job of our ensuite. Come up as if newly tiled. Not bad for a 23 year old bathroom. Great work.”

For Property Professionals

Landlords, Agents and Strata

Fresh silicone is a quick, visible fix before an inspection, a sale or a new tenant. Scheduled around tenants. Most jobs are completed in a single visit. We confirm the visit schedule and cure time before work begins.

Discuss a Property Job β†’

Service Areas

Silicone Replacement Across Melbourne

We replace silicone across Melbourne, including Brunswick, Essendon, Preston, Coburg, Reservoir, Thomastown, Epping, Heidelberg, Ivanhoe, Northcote, Fairfield, Box Hill, Doncaster, Templestowe, Balwyn, Kew, Hawthorn, Richmond, Fitzroy, Carlton, Footscray, Sunshine, Williamstown, Altona, Werribee, Point Cook, Hoppers Crossing, Frankston, Mornington, Cranbourne, Dandenong, Noble Park, Springvale, Clayton, Oakleigh, Bentleigh, Moorabbin, Cheltenham, Mentone, Ringwood, Croydon, Lilydale, Glen Waverley, Mount Waverley, Burwood, Ashwood and surrounding suburbs.

Your Questions, Answered

Silicone Replacement FAQs

What is silicone replacement?
Removing old silicone and resealing the joint with new silicone.
Can I just put new silicone over the old?
No. New silicone does not bond to old silicone and peels. The old bead is removed first.
How often should shower silicone be replaced?
There is no fixed date. Replace it when it is mouldy through, peeling, cracked or has gaps.
Can mouldy silicone be cleaned instead?
Surface mould can often be cleaned. Mould through the bead, or a lifted bead, means replacing it.
Silicone or grout: which do I need?
Silicone for corners and edges that move, grout for flat tile joints. If both are failing, see shower regrouting.
Does new silicone fix a leaking shower?
Only if the leak comes from the silicone. If water is getting out elsewhere, see leaking shower repair.
What silicone do you use?
A mould resistant silicone made for wet areas.
How long before I can use my shower?
It depends on the silicone. We tell you before we start.
How much does it cost to replace shower silicone in Melbourne?
It depends on the length, location, condition and access. We quote after we see it.
Can you replace silicone around a bath or vanity?
Yes. We replace silicone anywhere two wet area surfaces meet.
How long does new silicone last?
It varies with the product, the joint and how the area is used and cleaned. A joint that was fully stripped and resealed lasts far longer than a bead laid over old silicone.
Why does silicone go black?
Mould grows into the bead where moisture and soap scum sit. Once mould is through the bead rather than on the surface, cleaning will not shift it and the bead needs replacing.

Get Your Free Quote Today

Honest advice and workmanship you can rely on.

Full removal of old silicone Β· Clear quote first Β· Mould resistant finish

Call NowFree Quote